AlfaOBD scanning

[cholopapi]

If you want to use AlfaOBD to scan your Fiat, here's how to do it. I found this information online and thought it might be useful to share with the community. We thank the original author for creating this resource.

CONNECT:


SCAN & READ DATA:



NOTE: AGAIN, THESE ARE NOT MINE. I JUST SAW THESE FROM THE INTERNET. ALL CREDITS AND RIGHTS BELONG TO ITS RESPECTIVE OWNERS.

 

[r00fein]

If you want to use AlfaOBD to scan your Fiat, here's how to do it. I found this information online and thought it might be useful to share with the community. We thank the original author for creating this resource.

CONNECT:
View attachment 2

SCAN & READ DATA:

View attachment 3

NOTE: AGAIN, THESE ARE NOT MINE. I JUST SAW THESE FROM THE INTERNET. ALL CREDITS AND RIGHTS BELONG TO ITS RESPECTIVE OWNERS.

Thanks a bunch for sharing these @cholopapi ! They’re gonna be a lifesaver since I’m about to snag an OBD reader soon. Can’t wait to put this info to good use!

 

[Sasquatch55]

Hello folks. Need help.

I'm trying to troubleshoot my setup here. I can totally connect the OBD and check the SOH with AlfaOBD program without any trouble, but when I plug in this yellow adapter to grab data from other modules, like the body computer, things go sideways and I hit an error. Any ideas on what might be messing things up?

 

[Bigdog6792]

Hello folks. Need help.

I'm trying to troubleshoot my setup here. I can totally connect the OBD and check the SOH with AlfaOBD program without any trouble, but when I plug in this yellow adapter to grab data from other modules, like the body computer, things go sideways and I hit an error. Any ideas on what might be messing things up?

Man, some adapters can be total flops! But I gotta say, the OBDLink dongles has proven to be the most dependable option for all sorts of tasks. After wrestling with those cheap ELM327 models that just couldn’t cut it, I finally used OBDLink for my electronic brake calibration, and it was smooth sailing!

 

[gotti42]

Hello folks. Need help.

I'm trying to troubleshoot my setup here. I can totally connect the OBD and check the SOH with AlfaOBD program without any trouble, but when I plug in this yellow adapter to grab data from other modules, like the body computer, things go sideways and I hit an error. Any ideas on what might be messing things up?

Do you have the free or paid version of the software? Just curious what you're working with!

 

[Ovwing]

Thanks cholopapi - I’m just trying to set up AlfaOBD for the first time for my 2017 500e, using a PC. A higher res set of images would help, or perhaps a link, as the images are barely legible.